Paper Machine china Quanzhou Donggong Machine-Wet paper towel machine





ADD:Lingshan Industrial Area,
Tuzhai,Huian,Quanzhou,Fujian,China
TEL: 0086-595-22755178
FAX: 0086-595-22787311

Products >> Configuration of full-servo high speed sanitary napkin machine
Configuration of full-servo high speed sanitary napkin machine

Print】 【Big Mid Small】 【Close 】 Login:15576   Video: None

一、主要参数:
I Main technical specification
 
1.            产品结构:
    Product structure:
普通厚型产品:表层无纺布(或PE打孔膜)、上层卫生纸、吸水纸(棉芯+SAP
 Normal thick type product::top sheet non-woven(or PE perforated film)、elastic ribbon of
Stereo-Protection ,top tissue, absorbent paper(cotton core with SAP)、down tissue,PE film,
back release paper、wing release paper、packaging film、easy tape.
超薄型产品:双层防漏无纺布、表层无纺布(或PE打孔膜)、吸收芯体、下层卫生纸、PE膜、
包装膜、易撕贴。
Ultra thin:double layer anti-leakage non-woven, top sheet(non woven or PE perforated film)、
absorbent core(air laid、SAP paper)、down tissue、back sheet(PE film)、wing release paper、
packaging film、easy tape.
(as per drawing confirmed by both sides)
2.            棉芯结构:直条形棉芯两端弧形切断
structure of cotton corestraight type cotton core, two sides of core is arc.
产品规格:两种规格240mm,290mm(具体规格见产品)
Specification of sanitary napkin: 2 sizes: 240mm,290mm.
3.          设计速度:800片/分钟(290mm)
Design speed: 800 pieces/min(290mm)
4.            稳定生产速度:290mm(550片/分钟,普通型产品)。
Stable production speed: 290mm(550pieces/min)
5.            生产线中心距离:指产品的材料中心线离机架安装面板的距离200mm;
Production center distance: Referring to distance between the center line of product
material and main frame plate, 200mm.
6.            原材料分布:表面吸收层在下,底膜在上,180反转后为表层在上,底膜在下。
Spread of raw materials: under is topsheet for absorption, upper is back sheet. After
180 degrees of reversal, upper is topsheet for absorption,
Down is back sheet.
7.          产品克重偏差:± 2%
Product weight tolerance: ±2%
8.          产品成品率:≥ 99%(不含由于胶机、接料及材料接头引起的次废品)
Rate of finished product ≥ 99% (not including the defective products caused by glue applicator,
supplying of raw materials and joints of raw materials)
9.          开机率:≥ 88%
Efficiency range   ≥88%
10.      电源:380V 50HZ
Power: 380V/50HZ
11.      装机容量:≥260KW
Installment power       :≧260KW
12.      机器重量:约35T
 Machine Weight:About 35 tons
13.      电气供给:380V ±5%、50HZ 三相四线+接地线
Power source:   380V ±5%、50HZ, 3 phase 4 wires + ground wire
14.      供气压力: 0.6-0.8Mpa(需方自行准备气源)
  Supply air pressure: 0.6+0.8Mpa.
15.      机台走向:面对机器从          运行
Working direction of machine:to be defined by buyer
16.      机台颜色:可根据客户要求
Machine color: to be defined by buyer


Products | Sale Net | FeedBack | Contact Us

Quanzhou Donggong Machinery Manufacture Factory Copy Right
TEL:0086-595-22755178  FAX:0086-595-22787311
ADD: Lingshan Industrial Area,Tuzhai,Huian,Quanzhou,Fujian,China