ADD：Lingshan Industrial Area,
Tuzhai,Huian,Quanzhou,Fujian,China
Tuzhai,Huian,Quanzhou,Fujian,China
TEL:
0086-595-22755178
FAX:
0086-595-22787311
E-mail:
dhqg@donggong.com
 |
Products >> sanitary pad machine>> Configuration of full-servo high speed sanitary napkin machine |
| Configuration of full-servo high speed sanitary napkin machine | ||
|
||
|
一、主要参数：
I Main technical specification
1. 产品结构：
Product structure:
普通厚型产品：表层无纺布(或PE打孔膜）、上层卫生纸、吸水纸（棉芯+SAP
Normal thick type product:：top sheet non-woven(or PE perforated film)、elastic ribbon of
Stereo-Protection ,top tissue, absorbent paper(cotton core with SAP)、down tissue,PE film,
back release paper、wing release paper、packaging film、easy tape.
超薄型产品：双层防漏无纺布、表层无纺布(或PE打孔膜）、吸收芯体、下层卫生纸、PE膜、
包装膜、易撕贴。
Ultra thin：double layer anti-leakage non-woven, top sheet（non woven or PE perforated film)、
absorbent core(air laid、SAP paper)、down tissue、back sheet(PE film)、wing release paper、
packaging film、easy tape.
(as per drawing confirmed by both sides)
2. 棉芯结构：直条形棉芯两端弧形切断
structure of cotton core：straight type cotton core, two sides of core is arc.
产品规格：两种规格240mm,290mm（具体规格见产品）
Specification of sanitary napkin: 2 sizes: 240mm,290mm.
3. 设计速度：800片/分钟（290mm）
Design speed: 800 pieces/min(290mm)
4. 稳定生产速度：290mm（550片/分钟，普通型产品）。
Stable production speed: 290mm(550pieces/min)
5. 生产线中心距离：指产品的材料中心线离机架安装面板的距离200mm；
Production center distance: Referring to distance between the center line of product
material and main frame plate, 200mm.
6. 原材料分布：表面吸收层在下，底膜在上，180反转后为表层在上，底膜在下。
Spread of raw materials: under is topsheet for absorption, upper is back sheet. After
180 degrees of reversal, upper is topsheet for absorption,
Down is back sheet.
7. 产品克重偏差：± 2%
Product weight tolerance: ±2%
8. 产品成品率：≥ 99%（不含由于胶机、接料及材料接头引起的次废品）
Rate of finished product ≥ 99% (not including the defective products caused by glue applicator,
supplying of raw materials and joints of raw materials)
9. 开机率：≥ 88%
Efficiency range ≥88%
10. 电源：380V 50HZ
Power: 380V/50HZ
11. 装机容量：≥260KW
Installment power :≧260KW
12. 机器重量：约35T
Machine Weight:About 35 tons
13. 电气供给：380V ±5%、50HZ 三相四线+接地线
Power source: 380V ±5%、50HZ, 3 phase 4 wires + ground wire
14. 供气压力： 0.6-0.8Mpa（需方自行准备气源）
Supply air pressure: 0.6+0.8Mpa.
15. 机台走向：面对机器从 向 运行
Working direction of machine:to be defined by buyer
16. 机台颜色：可根据客户要求
Machine color: to be defined by buyer
|
||
Quanzhou Donggong Machinery Manufacture Factory Copy Right
TEL:0086-595-22755178 FAX:0086-595-22787311
ADD: Lingshan Industrial Area,Tuzhai,Huian,Quanzhou,Fujian,China
